Teledyne-lecroy CANbus TD and CANbus TDM - Operators Manual Uživatelský manuál stáhnout pdf (Strana 58)

CANbus Trigger, Decode, and Measure

CANbus-TD-TDM-OM-E RevB

CANH

Yellow

VB+ or VB

BATT

Red

Notes:

Connect Pin 3 as necessary, depending on whether it is low sped or single-wire CAN

Use for low-speed (1054) or single-wire (GM-LAN, 5790c) CAN

(ISO 11898-3, ISO 11519, SAE J2411)

Cable Part Number 902381-00

DSUB (9-pin) Pin #

Definition

Wire Color

CANL

White

CANH

Yellow

Notes:

A 120 ohm terminating resistor is connected across pins 2 and 7, in accordance with IS0

11898.

Use for high-speed (251, 1050, 1041) CAN

(ISO 11898-2)

VERIFYING PROPER TRIGGER MODULE CONNECTION TO THE CAN BUS

The CANbus TD/TDM Trigger Module has several LEDs on the front of the module. These LEDs

will light to indicate CAN message direction and error frame activity. There is one set of LEDs for

each input (or Trigger Coupler). The LEDs will light as follows:

LED

Indication

Flashes when messages are being

received

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 68 69

Žádné komentáře

Teledyne-lecroy CANbus TD and CANbus TDM - Operators Manual Uživatelský manuál Strana 58